Ironmaking & Steelmaking Vol. 53, No. 1, released

Innovating steelmaking through advanced simulation, slag engineering and low emission processes.

IOM3 members have free online access (login required) to this and other journals published on behalf of IOM3 by Sage.

Abatement of CO₂ emissions by lowering hot metal ratio (HMR) in basic oxygen steelmaking (BOS) process
Kyung Hwan Kim, Joo Hyun Park
pp. 3–16
DOI: 10.1177/03019233241260510

Numerical study on steel flow dynamic behaviour in a round mould under the effect of a swirling flow brick design in tundish
Lijin Geng, Shizheng Fu, Qinghua Xie, Mikael Ersson, Peiyuan Ni
pp. 17–28
DOI: 10.1177/03019233241260935

Calculation and experimental study of reactivity between CaO–BaO–Al₂O₃–CaF₂–Li₂O mould slag and low density and high strength steel
Xiaobo Yan, Jiahui Dai, Yumin Mao, Qian Wang, Lilong Zhu, Qiangqiang Wang
pp. 29–38
DOI: 10.1177/03019233241261214

Effect of the asymmetric flow behaviour of molten steel on solidified shell in slab continuous casting mould
Kun Li, Xinhua Li, Shanhong Li, Lingzhong Kong, Jie Yang, Ximin Zang
pp. 39–48
DOI: 10.1177/03019233241261574

The effect of differing Y concentrations on the evolution of the structure and mechanical properties of FeCrAl alloy
Guangming Cao, Zhonglin Wu, Jian Li, Pengjie Wang, Qiming Jiang, Xuyuan Zhang
pp. 49–58
DOI: 10.1177/03019233241265193

The performance and charge behaviour in melter/smelter for the production of hot metal in hydrogen DRI-based steelmaking
M. Shahabuddin, Alireza Rahbari, Shabnam Sabah, Geoffrey Brooks, John Pye, M. Akbar Rhamdhani
pp. 59–70
DOI: 10.1177/03019233241265179

Coupled CFD-FEM modeling of fluid–thermal–structural interaction in a single-strand tundish
Dong-Yuan Sheng
pp. 71–82
DOI: 10.1177/03019233241265807

Predicting viscosity for steelmaking slag: A stacking regression approach
Manish Kumar Singh, Kaushal Kishore Singh, Snehanshu Pal
pp. 83–99
DOI: 10.1177/03019233241265806

The method of reducing energy consumption in large blast furnace smelting by low-silicon smelting
Qiyuan Liu, Qinglin Chen, Nan Zhang, Rukang Yan, Jian Chu, Hongjun Sun, Bing Dai
pp. 100–116
DOI: 10.1177/03019233241266129

Investigation of wear and surface quality of raw AISI H13 hot work tool steel in electro-discharge machining machine
Engin Nas, Erman Zurnaci, Sıdıka Yildirim Gültekin
pp. 117–133
DOI: 10.1177/03019233251315315

Prediction of SO₂, NO_x and PM in the sintering process based on deep learning
Baorong Wang, Xiaoming Li, Yize Ren, Xuhui Lin, Zhiheng Yu, Xiangdong Xing
pp. 144–154
DOI: 10.1177/03019233241266713

Effect of Cs₂O-containing refining slag on the purity of ultra-clean steel for ultra-fine saw wire
Changyong Chen, Meng Sun, Mingze Ran, Mina Zhang, Zihui Dong, Yi Wang, Yang Li, Zhouhua Jiang
pp. 155–169
DOI: 10.1177/03019233241267049

Analysis of the scrap pre-heating inside an EOF steel refining furnace
Pedro Paulo Azevedo, Leonardo Neves
pp. 170–176
DOI: 10.1177/03019233241271505

Open Access: Effect of increasing the proportion of high-alumina iron ore on structures and properties of sinter produced in iron ore blending sintering process
Jian Hou, Jian Zhang, Zhiming Yan, Xuke Yang, Hongyan Wu, Xiaobo Huang, Chenguang Bai, Shengfu Zhang
pp. 177–188
DOI: 10.1177/03019233241273486

A novel cooling structure of narrow copper plate for small chamfered mold
Guobin Wang, Tao Hongbiao, Keran Zhu, Minglin Wang, Hui Zhang
pp. 189–201
DOI: 10.1177/03019233241273481

Correlation between the parameters of material transfer and granulation indexes in mixtures with varying ratios of concentrate to iron ore fines
Alain Nyembwe
pp. 202–213
DOI: 10.1177/0301923324126121